Molded Fiber Paint Tin Packaging for Cans and Containers

THECA’s molded fiber paint tin packaging range includes three protective formats for compatible 0.5–1 litre, 2.5 litre and 5 litre tins. Each product is evaluated around the actual container diameter, height, filled weight, lid, rim and base profile, handle position, pack quantity and secondary carton.

Purpose-shaped molded fiber components can help position containers, separate metal surfaces and support vulnerable edge areas during handling and transport. Because nominal volume alone does not define product fit, final compatibility should be confirmed using actual container samples or controlled drawings.

The complete pack must be validated with filled containers for carton closure, stacking, handling, impact, vibration and the expected distribution conditions.

THECA’s paint tin packaging range includes three molded fiber formats developed for different container capacities and geometries. Select the product using the actual tin, lid, handle and carton dimensions rather than nominal volume alone.

The 0.5–1 L Tin Molded Fiber Package is developed for compatible paint tins within this nominal capacity range. Its geometry is intended to support defined container areas and help maintain separation between the tin and the surrounding secondary packaging.

Actual container diameter, height, filled weight, lid and base profile, handle position and carton dimensions must be reviewed before compatibility is approved. Not every 0.5 or 1 litre tin should be assumed to have the same geometry.

The 2.5 L Tin Molded Fiber Package is developed around compatible 2.5 litre container dimensions and pack configurations. Form-fitting contact areas can be evaluated around the rim, lid, base and container body according to the required protection layout.

Fit must be checked using the actual tin because lid diameter, rim details, handle attachments, filled weight and carton space may vary between container suppliers.

The 5 L Tin Molded Fiber Package is developed for compatible larger-format paint tins. The protective geometry should be evaluated against the higher filled weight, container dimensions, lid and base profile, handle clearance and the intended carton or multipack arrangement.

Final approval should include container seating, pack closure, stacking, handling and transport trials using the actual filled product and secondary packaging.

Before selecting a molded fiber package, the application brief should define:

• Nominal container capacity
• Overall tin diameter and height
• Empty and filled container weight
• Lid, rim and base geometry
• Handle position and required clearance
• Container material and surface details
• Number of tins per carton or pack
• Internal carton dimensions
• Top, bottom or complete protection requirement
• Container orientation inside the pack
• Stacking and pallet arrangement
• Manual or automated packing method
• Distribution and transport conditions
• Known damage or leakage incidents
• Expected annual quantity

The 0.5–1 L, 2.5 L or 5 L formats provide an initial product reference, but final selection must be based on actual tin diameter, height, filled weight, lid, base, handle and carton dimensions.

No. Tins with the same nominal capacity may have different body diameters, heights, lids, rims, bases and handle attachments. A drawing or physical sample is recommended.

Top and bottom support geometry can be evaluated around compatible lids, rims and bases. The design must account for filled weight, handle position and the complete pack arrangement.

The protective component should not be presented as a leakage-prevention system unless the complete container and packaging system have been validated for that purpose. Container closure integrity remains a separate requirement.

Potentially, but only when the intended container geometries, filled weights and contact areas have been evaluated. Multi-size compatibility should not be assumed without a fit trial.

Share the tin capacity, dimensions, filled weight, lid and handle details, quantity per carton, secondary packaging dimensions and current damage risks. THECA will review whether the 0.5–1 L, 2.5 L or 5 L molded fiber package is the most suitable option for the next evaluation step.

Explore all molded fiber packaging products.

Learn about THECA technology and product development.

Review certificates and analysis reports.